Domestic - Wire Rope Sling - Two Leg w/ Latched Sling Hooks - Rope Dia: 1/2 in, Length 10 ft
Item: Wire Rope Sling. Domestic - Two Leg with Hooks. Capacity: 2.5 to 4.4 tons. Rope Diameter: 1/2 inch. Leg Length: 10 feet
Application: For general purpose overhead lifting using bridle hitch arrangement with triple pick points. Hoisting point is directly over the center of gravity of the load, the load is raised while level. Intended for crane applications, lifting, rigging, and material handling uses
Description: Bridle wire rope lifting sling with (3) three single part rope legs. Flemish loops with thimbles are formed at each leg end by mechanical splicing. Assembly incorporates an oblong master link, and leg-end standard latched sling hooks. The bridle hitch provides excellent load stability when the load is distributed equally among the wire rope legs. Quadruple leg assembly has ready-made end attachments for lift applications. Elongated master link attachment allows additional clearance at the hoisting connection. *NOTE: The use of a wire rope lifting sling requires that the cable angles be carefully determined to ensure that the legs are not overloaded.
Wire Rope Material: Made from independent wire rope core (IWRC), which offers less stretch and resistance to crushing while maintaining flexibility. Fabricated from extra improved plow steel (EIPS). Rope with diameter of up to 1 inch has an outer rope formed of 6 strands with 25 wires per strand. Rope with diameter of 1 1/4 inches and above are formed of 6 strands with 37 wires per strand
Quality: Manufactured in the USA. Bears a tag displaying the rated capacity. Meets or exceeds overhead lifting safety standards under ASME B30.9The Difference: Low quality products can cause injury and damage. Look-a-like wire rope slings, often found at lower prices, are also often advertised to conform to the same safety standards, if at all. Be aware that it may refer to safety ratings in effect decades ago. So for example, under the same safety standard a decade ago, a wire rope sling may be rated to 100% without proof load testing while today it may be 300% with proof load testing. Be assured that we only sell the highest quality wire rope lifting slings, and our advertised safety standards conform to the current ASME standards.
Industry Name: Also referred to as a cable sling or bridle lifting sling
Includes: (1) wire rope lifting sling
WARNING: Never exceed rated capacity!
- Alternate Name 1 Bridle Sling
- Capacity at 30 Degrees (tons) 2.5
- Capacity at 45 Degrees (tons) 3.6
- Capacity at 60 Degrees (tons) 4.4
- Industry Designation 1/2 ASI-228C-x10
- Industry Name Wire Rope Sling
- Rope Diameter (in) 1/2
- Rope Length (ft) 10
- Usually Ships Within 3 - 7 days
- Weight (lbs) 20
Wire Rope Sling Educational Content
- Never Exceed Working Load Limits of the Wire Rope Lifting Sling.
- Rated sling capacities of basket hitches are based on minimum diameter of curvature at the point of load contact of 20 times the rope diameter.
- Wire Rope Material: The lifting slings are made from independent wire rope core (IWRC) offering less stretch and resistance to crushing while maintaining sling flexibility. Wire rope slings are fabricated from extra improved plow steel (EIPS).
Learn: The Quality Difference
A low quality wire rope sling can cause injury and damage. A look-alike wire rope sling often found at lower prices is also often advertised to conform to the same safety standards (if at all). Be aware that it may refer to safety ratings in effect decades ago. So for example under the same safety standard a decade ago, a wire rope sling may be rated to 100% without proof load testing while today it may be 300% with proof load testing. Be assured that we only sell the highest quality wire rope slings and our advertised safety standards conform to the current ASME standards.
How sling capacities change with varying angle of use
Working load limits (capacity) of the wire rope lifting slings vary depending on the angle of use. The capacity is reduced as the angle of use declines. See drawing below how a 1,000 lbs sling capacity is reduced as the angle of use declines. The capacity of the sling is always highest at a 90 degree angle of use and smallest at an angle of 30 degrees (or less).
Learn: The difference between Wire Rope Slings, Chain Slings, Nylon Slings and Polyester Slings
The chain sling has the advantage of being durable, very flexible and its length can be made adjustable. It will tolerate a wide range of temperatures; however, compared to other types, it is relatively expensive and, depending upon the grade of chain used, relatively heavy.
Wire Rope Slings
The wire rope sling is not quite as durable. The wire rope sling is not as flexible as chain but its greater stiffness can be an advantage if it has to be inserted through a small opening or beneath a load. However, when wrapped around a load, the wire rope sling often tends to deform permanently to the shape of the load. Wire rope suitable for slings comes in a variety of grades and constructions. In most cases looping back and securing the loop with a metal sleeve terminates the rope. This forms a loop or soft eye, the simplest form of sling end. Thimbles are used to support and protect the eye from abrasion. Wire rope is generally cheaper and lighter than chain which can be a plus, particularly for applications that require long sling lengths.
Nylon and Polyester Slings
The nylon and polyester slings have the advantage of being lightweight in comparison to chain and wire rope slings. They are very flexible and relatively soft; therefore, they are suitable in applications were minimal damage to the load's surface finish is important. The rope is made endless or terminated with an eye by means of a handmade splice. Similar to a wire rope sling, various terminal fittings are available. Without adequate protection, nylon and poly slings are susceptible to being severed when impinging on even a relatively moderate sharp edge.
Learn: About wire rope, types of steel and splicing methods
Wire rope is often commonly referred to as cable; they are one in the same. Wire rope is composed of wires, strands, and a core. The basic unit is the wire, which is formed into strands. The strands are wound around the core. Various types of wire rope exist to meet a range of uses and operating conditions. These types are designated by the number of strands; the number, sizes and arrangement of the wires in each strand; and the way in which the wires and strands are wound, or laid, about each other.
Important characteristics of wire rope relate to the number and size of the outer wires. A small number of large outer wires result in better resistance to wear and corrosion. A large number of small wires result in better flexibility and resistance to fatigue.
The core acts as the axial member about which the strands are laid. Wire rope cores are made in two different forms. The one used most extensively is a wire rope of suitable size to serve as a core. It is called as independent wire rope core (IWRC). IWRC has increased tensile strength, offers less stretch, and is resistant to crushing; however, is less flexible. The other type is a wire strand core (WSC). This consists of a multiple-wire strand, and may be the same construction as the main rope strands.
Wire rope material:
Two grades of carbon steel wire are offered. The bulk of commercial wire rope lifting sling is made from improved plow steel (IPS) or extra improved plow steel (EIPS) which has a higher tensile strength.
Types of splicing to create the loops:
Splices at the eye formation of the sling can be made by hand or mechanically (also known as "flemished").
Hand Splicing: Because no metal sleeve is required to secure the eye in the hand spliced sling, it exhibits more flexibility than mechanically splice slings of equal diameter. They have a more narrow profile and therefore can fit through tight spaces. Without benefit of a metal sleeve, lifts must be limited to applications where the wire rope sling is restrained from rotation and possible unlaying of the sling body.
Mechanical Splicing: Mechanically spliced eyes do not suffer the limitations of hand splicing, are economical, and offer the highest rated capacity of any spliced wire rope sling. This wire rope sling is fabricated by unlaying the rope body into two parts, one containing half the number of strands, the other having the remaining strands and core. The rope is unlayed far enough back to allow the eye to be formed by looping one part in one direction and the other part in the opposite direction and laying the rope back together. The strands are rolled back around the rope body and a metal sleeve is slipped over the ends and pressed (or swaged) to secure the ends to the body of the wire rope sling.
Learn: Industry designation:
A wire rope sling is also called a cable lifting sling.