Fork Fangs

Manufacturer / Country of Origin: JUNG / Germany

Application: Forklift tie-down clamps called 'Fork Fangs' safely secure a heavy load to the forks of a forklift.

Description: Provides secure attachment points and stationary stops for load stability during lifting and transport.
'Screw type' clamps are block-type forklift fork clamps with compression bolts.
'Eye type' clamps are heavy-duty specially fabricated eye style fittings that slide over fork.
Galvanized to prevent rust and corrosion. For use with nylon tie-downs and binder chains.

Size & Compatibility: Fork Fangs (patent protected) include adjustable 'screw-type' mounting brackets to fit most fork widths. The fixed 'eye-type' clamps will fit all forks up to 2 inches in height. See size chart below.
Versions:

• Standard: Has fixed eye bolts for strapping in-line.
• Deluxe: Has swivel eye bolts for strapping in any direction.

How to Use: Slide 'screw type' clamps to rear area of forks and clamp securely in place by tightening bolts. Grab the load with the forks. Slide 'eye type' clamps onto the front of the forks. Run appropriate sling or chain from rear 'screw type clamps to front 'eye type' clamps overtop of load and secure. Use with any nylon straps or load binder chains matching the needed capacity.

Quality Standard: Comes with Lifetime Technical Support. Over 40 years of parts available.

Sets Include: (2) two 'eye' and (2) two 'screw' forklift tie-down clamps.

Click Here for further pictures, videos, technical information, and engineering drawings.

WARNING: NOT for overhead lifting or suspending of loads!  Never exceed rated capacity!