Forklift Turntable - Capacity 15 tons / 33,000 lbs - MPN JLT15

Manufacturer / Country of Origin:  JUNG / Germany

Description: Designed to allow the operator to move heavy loads while having the load in front of him. Provides better visibility and gives the operator better control over positioning and placement of loads. Will fit any forks up to a 6 inch width. Place on top of the forks positioned on the anti-slip pad on the bottom of the turn table.

Understanding Capacity: Drawbar force is the pushing/pulling force exerted, not the load weight capacity. For example: A 10 ton load (load capacity) on dollies with a 10% break-out rolling resistance will require 1 ton of drawbar force, i.e. you need to push with 1 ton of force to get the load rolling. The advertised 'load capacity' is the load weight when used with the same manufacturer’s dollies since the rolling resistance is known.

Includes: (1) one forklift turntable

WARNING: Determine the rolling resistance of your dollies and verify that the drawbar capacity is adequate if used with another brand or type of dolly. Turntable height must match the height of the dollies being use for the move. Failure to match height can result in uneven load transfer and cause failures. Never exceed rated capacity!