Polyester Round Sling - Endless Loop - 3-8 Feet
Polyester Round Sling Educational Content
- Never Exceed Working Load Limits.
Learn: Construction of a Polyester Sling
A polyester round sling is made up of polyester fiber strands, protected inside a polyester sleeve. The rope strands are the load-bearing components while the sleeve simply shields the strands from cuts and abrasion.
Learn: The Quality Difference
A low quality polyester sling can cause injury and damage. Look-alike polyester slings often found at lower prices are also often advertised to conform to the same safety standards (if at all). Be aware that it may refer to safety ratings in effect decades ago. So for example under the same safety standard a decade ago, a round sling may be rated to 100% without proof load testing while today it may be 300% with proof load testing. Be assured that we only sell the highest quality polyester slings and our advertised safety standards conform to the current ASME standards.
Learn: Different uses of polyester round slings:
To accommodate various applications, polyester slings can be utilized using a vertical hitch, choker hitch, basket hitch or bridle hitch. See diagram below. It is important to know, however, that the load capacities change with the type of hitch and angle of use.
Learn: How capacities change with varying angle of use:
Working load limits (capacity) of a polyester sling vary depending on the angle of use. The capacity is reduced as the angle of use declines. See drawing below how a 1,000 lbs capacity is reduced as the angle of use declines. The capacity of the round sling is always highest at a 90 degree angle of use and smallest at an angle of 30 degrees (or less).
Learn: When and how to choose a fabric sling:
In the field, textile fiber slings such as nylon or polyester slings are often commonly referred to as “chokers”. The polyester sling has the advantage of being lightweight. It is very flexible and relatively soft; therefore, it is suitable in applications were minimal damage to the load’s surface finish is important.
Without adequate protection, synthetic fiber polyester slings are susceptible to abrasion or being severed when impinged on even a moderately sharp edge. Wear pads and sleeves (added thickness material) are available to provide abrasion protection at vulnerable points along the polyester sling. Some styles of polyester slings are encased in a nylon jacket for extra abrasion resistance.
Textile synthetic fiber slings can be fabricated to be endless (also known as a grommet sling) or with an eye at each end. Eyes on the polyester sling can be plain or fitted with various metal end fittings to allow vertical, choker, or basket hitch lift arrangements.
Learn: The difference between Nylon versus Polyester slings:
Both materials - nylon and polyester slings - are strong, lightweight, and very flexible; they can be used safely at temperatures up to 200� degreeF. The difference between the two materials falls into the categories of elongation under load and chemical resistance.
Even when treated for abrasion, nylon can stretch up to 10% of its initial length under rated load. This is contrasted to only 3% elongation for polyester slings.
Nylon is resistant to most regularly encountered chemicals with the exception of concentrated acids and bleaches. While not as much of a problem, prolonged exposure to sunlight results in UV degradation of nylon. A polyester sling, while disintegrated by concentrated sulfuric acid, is resistant to most other acids and most other chemicals. Polyester slings should be avoided where aldehydes or ethers are present and where strong alkalis at elevated temperatures are encountered.
Learn: Industry designation:
A polyester sling is also called a round sling. The name "round sling" does not come from the endless loop construction but rather from the round cross-section of the sling.