Non Marking Vertical Lifting Clamp - Capacity 2,200 lbs
Product Description
Item: Non Marking Vertical Lifting Clamp. Large Jaw. Capacity: 2,200 lbs
Country of Origin: Made in Holland
Application: For the vertical lifting of and transporting of steel plates and structures where the clamp will come into contact with stainless steel, aluminum, copper, wood, or marble plates
Description: Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered - Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Suitable for atmospheric conditions between -40° (degrees) F to 212° (degrees) F. Locks in the closed position as well as the open position. Has the lifting capacity clearly engraved on the jaw opening and body as well. Feature two special synthetic non marking pads to help protect the material or load being lifted
Quality Standard: Tested up to 2 times the Safe Working Load (SWL). Designed on a break factor of 5 times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC
Includes: (1) one clamp
WARNING: Never use the plate clamps with less than 10% of rated capacity. Lift only one plate at a time. Make sure that all plates are clean and free of oil and debris. Never overload and prevent jerking of loads. Never exceed rated capacity!