Terrier - Adjustable Non Marking Vertical Lifting Clamp - Capacity 1,100 lbs

Item: Adjustable Non Marking Vertical Lifting Clamp. Capacity: 1,100 lbs

Country of Origin: Made in Holland

Application: For the vertical lifting of and transporting of steel plates and structures where the clamp will come into contact with stainless steel, aluminum, copper, wood, or marble plates

Description: These Terrier lifting clamps feature (2) two special synthetic non marking pads to help protect the material or load being lifted. Can be adjusted in steps of 0.79 inch - Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered - Locks in the closed and open positions. Has the lifting capacity clearly engraved on not only the jaw opening and body - Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Suitable for atmospheric conditions, between -40° (degrees) F to 212° (degrees) F

Quality Standard: Tested up to (2) two times the Safe Working Load (SWL). Designed on a break factor of (5) five times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC

Includes: (1) one lifting clamp

WARNING: Never use the plate clamps with less than 10% of rated capacity. Lift only one plate at a time. Make sure that all plates are clean and free of oil and debris. Never overload and prevent jerking of loads. Never exceed rated capacity!