Horizontal Beam Clamp - Capacity 4,400 lbs

Item: Horizontal Beam Clamp. Capacity: 4,400 lbs

Application: For the lifting, turning, and transporting of steel beams, profiles, and structures where the load must stay in position. Recommended for the transporting, sawing, and stacking of steel beams, and the building of steel construction

Country of Origin: Made in Holland

Description: Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered - Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Suitable for atmospheric conditions between -40° (degrees) F to 212° (degrees) F. Locks in the closed position as well as the open position. Has the lifting capacity clearly engraved on not only the jaw opening, but the body as well

Quality Standard: Tested up to (2) two times the Safe Working Load (SWL). Designed on a break factor of (5) five times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC

Includes: (1) one clamp

WARNING: Made to be used in pairs - Never use the plate clamps with less than 10% of rated capacity. Lift only one plate at a time. Make sure that all plates are clean and free of oil and debris. Never overload and prevent jerking of loads. Never exceed rated capacity!