Model: TE00140

Vertical Lifting Clamp - Capacity 44,000 lbs

Quick Info

For vertical lifting and transporting of steel plates and structures
Clamp does not slip when lifting force is applied & when lowering load
The clamp is locked in closed as well as in open position
Lifting capacity and jaw openings are clearly engraved in the body

Product Description

Item: Vertical Lifting Clamp. Capacity: 44,000 lbs

Application: For the vertical lifting of and transporting of steel plates and structures.

Description: Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered. Locks in the closed position as well as the open position. Has the lifting capacity clearly engraved on not only the jaw opening, and body as well

Quality Standard: Tested up to 2 times the Safe Working Load (SWL). Designed on a break factor of 5 times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC

General Information: Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Suitable for atmospheric conditions, between -40° (degrees) F to 212° (degrees) F

Country of Origin: Made in Holland

Includes: (1) one Clamp

WARNING: Never use the plate clamps with less than 10% of rated capacity. Lift only one plate at a time. Make sure that all plates are clean and free of oil and debris. Never overload and prevent jerking of loads - Never exceeed rated capacity!