Horizontal Thin Sheet Lifting Clamp - Capacity 4,400 lbs

Model: TE00970

Usually Ships Within: 3 - 7 days

Quick Info

Designed for horizontal lifting of plates that may deflect when lifted
Maximum amount of deflection is 15%
Must always be used in pairs, working load limit is the rating for 2 or more clamps
Individually proof tested to 2x the working load limit (certificate included)

Product Description & Specifications

Product Description

Item: Horizontal Thin Sheet Lifting Clamp. Capacity: 4,400 lbs

Country of Origin: Made in Holland

Application: For the horizontal lifting and transporting of thin steel sheets that deflect when they are being lifted

Description: Compact shape and relative light unit weight with a high lifting capacity. Lifting capacity clearly engraved on the jaw opening and the body. When using horizontal thin sheet plate clamps TDH, a minimum of (2) two clamps must be used at all times. Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Suitable for atmospheric conditions, between -40° (degrees) F to 212° (degrees) F

Quality Standard: Tested up to 2 times the Safe Working Load (SWL). These lifting clamps are designed on a break factor of 5 times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC

Includes: (1) one clamp

WARNING: Minimum of (2) two plate clamps must be used at all time. Never overload and prevent jerking of loads. Never exceed rated capacity!