Horizontal Non Marking Lifting Clamp - Capacity 6,600 lbs

Item: Horizontal Non Marking Lifting Clamp. Capacity 6,600 lbs

Country of Origin: Made in Holland

Application: For the horizontal lifting of and transporting of objects with fragile surfaces such as stainless steel, copper, wood panels, aluminum, and more

Description: A compact shape and relative light unit weight with a high lifting capacity. Jaw and cam is covered with a high quality pressure resistant plastic. Each lifting clamp is suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Each clamp is suitable for atmospheric conditions, between -40° (degrees) F to 212° (degrees) F. Lifting capacity clearly engraved on not only the jaw opening, but the body as well. TNMH models have larger jaw openings

Quality Standard: Tested up to (2) two times the Safe Working Load (SWL). Designed on a break factor of 5 times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC

Includes: (1) one clamp

WARNING: A minimum of (2) two plate clamps must be used at all time. Never overload and prevent jerking of loads. Never exceed rated capacity!