Item: Vertical Lifting Clamps - Capacities: 2,200 to 66,000 lbs
Country of Origin: Made in Holland
Application: For lifting (stainless) steel sheets, profiles or structures in a straight up direction
Description: Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered.
Locks in the closed position as well as the open position. Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC. (345 HB)
Suitable for atmospheric conditions between -40° (degrees) F to 212° (degrees) F.
Has the lifting capacity clearly engraved on the jaw opening and body.
Quality Standard: Tested up to 2 times the Safe Working Load (SWL) - Designed on a break factor of 5 times the Safe Working Load (SWL) - Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC
WARNING: Never use the plate clamps with less than 10% of rated capacity - Lift only one plate at a time - Make sure that all plates are clean and free of oil and debris - Never overload and prevent jerking of loads - Never exceeed rated capacity!