Turnbuckle - Galvanized Hook & Hook - 1/2" x 9"
Item: Turnbuckle. Hook & Hook. Galvanized - 1/2 inch x 9 inches. Working Load Limit: 1,500 lbs
Application: Used for securing and tensioning of aircraft cables, ropes, wire ropes, tie rods, and tensioning systems - For use in straight or in-line pulling applications only
Description: Manufactured from heated steel. Drop forged and galvanized for maximum strength, safety, and weather resistance. Body of the hook & hook turnbuckle is normalized. End fittings are quenched and tempered. Consists of the main body (middle section) and two threaded end links. To tighten the turnbuckle, simply spin the threaded body either clockwise or counter clockwise depending on the application and the direction of the buckle
Industry Names: Also known as 'stretching screws' and 'bottle screws'
Includes: (10) ten turnbuckles
WARNING: For use in straight or in-line pulling applications only - NOT for lifting or suspending of loads! - NOT for overhead lifting!. Never exceed rated capacity!
- Alternate Name 1 Air Craft Cable Turnbuckles
- Alternate Name 2 Wire Rope Turnbuckles
- Cable Diameter (in) 1/2 in
- Closed Length (in) 16.31
- Industry Name Turnbuckles
- Length With Ends in Closed Position (in) 16.31
- Quantity of 10
- Take up (in) 9
- Turnbuckle Size 1/2 in
- Turnbuckle Type Hook & Hook
- Usually Ships Within 3 - 7 days
- Weight (lbs) 2
- Working Load Limit (lbs) 1500