Vertical Beam Clamp

Items: Vertical Beam Clamps - Capacity: 2,200 to 6,600 lbs

Country of Origin: Made in Holland

Application: For the lifting, turning, and transporting of steel beams, profiles and structures where the load must stay in position - Recommended for the transporting, sawing, stacking of steel beams, and the building of steel construction

Description: Special shape of the lifting shackle places the center of gravity of the beam beneath the lifting shackle.

Allows the clamp to maintain the equilibrium of the beam once it has been lifted. Keeps the flanges vertical so that the beam can easily be stacked or positioned. 

Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered. Locks in the closed and open position. 

Has the lifting capacity clearly engraved on the jaw opening and body. 

Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC. (345 HB)

Suitable for atmospheric conditions between -40° (degrees) F to 212° (degrees) F.

Quality Standard: Tested up to 2 times the Safe Working Load (SWL) - Designed on a break factor of 5 times the Safe Working Load (SWL) - Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC

Includes: (1) one beam clamp

WARNING: Never use the plate clamps with less than 10% of rated capacity - Lift only one plate at a time - Make sure that all plates are clean and free of oil and debris - Never overload and prevent jerking of loads - Never exceed rated capacity!