Item: Vertical Lifting Clamp. Capacity: 4,400 lbs
Country of Origin: Made in Holland
Application: For the vertical lifting of and transporting of steel plates and structures.
Description: Equipped with a safety mechanism to better ensure that the clamp does not slip when lifting force is applied and when the load is being lowered - Suitable for the lifting and transporting of steel plates with a maximum hardness of 37 HrC (345 HB). Suitable for atmospheric conditions, between -40° (degrees) F to 212° (degrees) F. Locks in the closed position as well as the open position. Has the lifting capacity clearly engraved on not only the jaw opening, and body as well
Quality Standard: Tested up to 2 times the Safe Working Load (SWL). Designed on a break factor of 5 times the Safe Working Load (SWL). Meets all standards and requirements: European Norm NEN 13155, Australian Norm 4991, American Norm ASME B30.20-2010 and European Machine Directive 2006/42/EC
Includes: (1) one Clamp
WARNING: Never use the plate clamps with less than 10% of rated capacity. Lift only one plate at a time. Make sure that all plates are clean and free of oil and debris. Never overload and prevent jerking of loads - Never exceeed rated capacity!