JUNG - Container Dolly - Set - Capacity 28 tons / 56,000 lbs - MPN JTL14K + CF - JFB 14K + CF
Quick Info: Freight Container Dollies - Indoor - Heavy Duty - JUWAthan Rollers - Set Capacity: 28 tons
Manufacturer / Country of Origin: JUNG / Made in Germany
- Indoor: Low profile and designed for use on smooth floors. Outfitted with cone style container fittings, which are spikes that slide into the container corner holes to prevent slipping of the dollies.
- Capacity (lbs) 56,000
- Capacity (tons) 28
- Capacity of Each Load Cassette (tons) 7
- Height (in) 6.6
- Height to Top of Fitting (in) 6.7
- Manufacturer JUNG
- Set Capacity (tons) 28
- Set Weight (lbs) 500
- Type Indoor (cone)
- Usually Ships Within Same Day
- Wheel Diameter (in) 3.3
- Wheel Type JUWAthan
- Width Fitting to Fitting (in) 89
- Never exceed working load limits!
Example of Application Pictures:
The dolly system consists of two interconnected steerable front dolly units and two interconnected rear straight-line followers which provide maneuverability like a car: The front steers, the rear follows in a straight line. The front dolly is outfitted with a pulling handle which is used for steering and pulling. The pulling handle has a towing eye which can be attached to a towing vehicle such as a forklift.
The Indoor Version of the container dollies is outfitted with cone fittings. The cone fittings slide into the corner holes of a container. As long as the container does not rock and lift up, the corner fittings hold firmly in the corner holes and keep the dollies from sliding out even under pulling and tugging action. The fittings are low in height ideal for customers that want to keep the container close to the ground.
The Outdoor Version of the container dollies is outfitted with twist-lock fittings. These twist-locks are much taller than the cone fittings on the “indoor version” and slide higher up into the corner holes of the container. A handle on the twist-lock can be pulled to turn the tip of the twist-lock 90 degrees and in turn locking the fitting into the hole. This attaches the dolly firmly to the container and it cannot slide out.
Further technical information, pictures, videos, engineering drawings, etc. on our freight shipping container dollies is also available at Toolwell.com.
The dollies are outfitted with patented JUWAthan-plus rollers. The roller material is baked in an oven over a long period for elasticity & extreme toughness for superior performance & durability over traditional polyurethane, composite or steel rollers. The rollers are non-floor damaging and non-floor marking. The rollers can be used on smooth & rough floors, on floors with cracks & dirt, inside & outside. The elastic rollers mold around obstacles and keep rolling whereby overcoming small obstacles easily by - No stop, up & over action required like with other rollers. The material spreads out intentionally for keeping low floor pressure. The rollers have low break out & low rolling resistance with low push-pull force and low manpower requirements. The rollers are shock absorbent and reliable under toughest working conditions.